Do you want to renovate your house? In reality, renovating a house is often not an easy job for everyone. This is because of the many aspects that need to be taken into account. However, if you don’t have to call in the professionals, there are a number of steps you can take to renovate your home. Discover through this detailed guide the steps to follow for a successful job.
Identify the equipment needed for facade demolition
The first thing to do when you are about to start renovating your home is to identify the equipment you will need. In general, you’ll need to have:
- a mask
- safety glasses
- a hammer
- a cutter
- a drill
- a saw
- screwdrivers, etc.
Once you have all the tools at your disposal, you will need to make a detailed plan of the area to be renovated. To this end, for the renovation of the kitchen or a partial part of the house, you can list the areas to be demolished. However, if it is a complete renovation, you will have to make an estimate to know exactly the budget to allocate to the work.
You can then start by demolishing the facades, the roof and all other parts depending on the type of renovation to be done. To do this, you can be assisted by one or two people. You will need** demolition machines** to break the walls. For areas such as the roof, you can do this by using a hammer. You can also use it can on the plates.
If you plan to renovate the exterior of the house, you will need to get rid of the old exterior walls. Then you can do some work on the frame and the exterior railings if you have a deck. After this demolition step, you’ll need to remove the waste from the debris so you can have a more generalized view of the space. You can then move on to the isolation maneuvers.
The Second Steps: Insulation
Insulation is the next step in your home renovation process. This work is essential in the renovation process because it allows you to keep your home comfortable. This by preventing untimely heat in the house.
As such, you can proceed with the thermal insulation to allow the circulation of air in the house. You will then have to plan the installation of the heating system. You can also insulate the roof, the attic and also the walls outside. As for the insulation of the walls from the outside, you can attach a new layer of insulation to the facade in order to promote a thermogenic ease.
You can also insulate the walls from the inside of the house or install double glazing. Also, you have the possibility to insulate conventionally or by inversion the roof of the terrace of your house. Once the main insulation areas have been completed, you can finish by insulating the floor of your home.
Managing the electrical and plumbing work
After finishing the thermal insulation work, you will need to move on to managing the electrical work. To do this, you must call upon the expertise of a professional in building electricity. The latter will have to do the remaining work for the installation of the current conduits before you continue with the other renovation tasks.
The plumber’s assistance following the electrician’s visit would be another step in your renovation. The plumber will have to install the pipes to facilitate the water flow. This is to avoid probable water leaks at the end of the work.
Other work to be done for the renovation
After the demolition and dismantling stage, it is time to move on to the refurbishment work. You can distinguish among others: the construction of the new facades, the painting works and finally the floor covering.
The construction of new facades
You can proceed to the construction of the walls and facades following the architectural plan at your disposal. At this stage, you can entrust the construction to **professionals **in the field. They can start with the foundation if it is a global renovation.
The painting work
Once the construction is completed, you will have to think about **painting the interior and exterior **walls. Without forgetting to paint the ceiling as well.
The work of the floor
The flooring is the post-final stage of your renovation. At this level, the specialists in tiling or waxed parure installation will be in charge of the rest of the work.
Once the coating is complete, you will need to finish your renovation with finishing details such as cleaning the area. You can entrust this operation to structures specialized in this field.